Hi all ,
On Friday this weekend I’m going to try my first play with the VB2 in real casino .
I’m almost one month reading posts an threads in this forum and also practice on roulette spins from the videos from the ap forum.
I think that i got 90% of the system and to understand it more in real play ,first ill observing of course and then play real so wish my luck:-).
My bankroll is 1.5k.
Tips will be great from the experts .
I hope to come back with success story.
E.M
Don’t forget to first have an idea how the ball jumps.
http://rouletteplace.com/index.php/topic,706.0.html
Good luck 
Good luck Dude! Let us know how it goes! 
Good luck mate.
I only use VB2. Stick to minimum bet and stay at flat betting. It happens where you might have 3-4 hits out of 5 spins and then think “shit! I’m gonna kill 'em!” Then raise your bets and no more hits for the next 10 spins… I know I’ve done it! So keep it simple and flat bet only. I’ll be holding thumbs!
Good luck pal! And keep posting about your results…
I wish you good luck!
May Lady Luck always be by your side 8)
Thank you very much all.
The casino were I’m going to play there is the tow kind of wheels ,commugh and the other one
on what wheel is better to play ?
I’m going to play only CW ball direction .
The ball i think is 17 or 20 mm .
By the way , i have iPhone 4 can any one guidemy to a viber metronome that can measure 30 BPM ?
Thanks agin,
EM.
There are many kind of Cammegh wheels. No idea what the other one is. Of the Cammegh wheels I have come across the ball tracks tend to slow the ball down a lot faster than the other wheels I have encountered. It makes identifying a knee point easier but really cuts down on the amount of time you have to bet.
As for which one to play? In my opinion, play the most tilted one with the most stable scatter. With only two wheels to choose from, that might be easier said than done.
P.S. HOLY SHIT FORESTER!!! Those boobs are awesome! It took me forever to reply to this thread! hahaha!
I started this thread, you can add more problems.
Possible mistakes when visually predicting roulette outcome.
Kingem, best of luck and please let us know how did it go.
There are more starters of us as you are, so any information from first hand experience is more then welcomed.
Cheers
Tiro
If with $ 1000 you play 100 spins 7 pockets in total $35 you have a 70% chance of ending with bankroll $200-$1600 without any advantage.
If you play with 20% advantage you have 70% chance to end up with $1000-$2500.
Hi all ,
I’m writing from the casino on my room .
Well it’s very Hard to play because it’s hard
To find advantage , there is 8 roulette table all of them are Cammegh wheel
The problem is that the rotor speed is 2-2.5 sec so the ball jumps random .
I have play some spins but couldn’t win so I wait and observe until I find
Any advantage , then leatter I found rotor with 3 sec speed and the jumping ball was beter so
I win 3 time in arow but then the dealer tell me that I bet to late and
NMB announced earlier .
Keep play but also lose so I stopped play and with bankroll of 900$ of 1500$.
I don’t have timer so I use 1,2,3,4,5,6,…10 I appling time of 1.2 sec .
Any advice will be great as soon as possible .
E.m
So very fast rottors are not good for VB2.
Forester advises even 3 sec rottor is fast and not so good for playin VB2.
If you have no right conditions, no play. That is rule no.1. The rest would be gambling.
Being precise on 1.2 secs with head timer is incredibly hard and very incosistent by my opinion.
All this you said sounds very bad and hard to have good play and winnings considering you aim to play with an edge.
Btw, you didnt said about the tilt?
Cheers
Tiro
Why play VB2 and don’t play RC?
All that VB2 can do, RC can do better and with more precision.
W FFV Acrobat!!
Most of the wheels are levelled but 2 of them is about 60% tilt .
I’m waiting for the FFZ-A .
E.M
1.2s time definitely wouldn’t be good time.
You can try;
http://rouletteplace.com/index.php?topic=1486.0
or; for example, you observe ball spinning at one DD. You read numbers under the ball like
0,19,2,6,11,5,9,15
notice the difference 0-19 3 pockets then next rotation ball crosses 19 then next time 2 but then notice from 5-9 it is a rapid jump in difference in between numbers.
Most of the time the rotor speed is 3 sec , what is the best time to apply ?
I’m with bankroll of 1100$ now from 1500$ .
I’m going to get some rest , tomorrow the last day I hope that I can manage to make some profit .
E.M
[quote=“forester, post:17, topic:865”]1.2s time definitely wouldn’t be good time.
You can try;
http://rouletteplace.com/index.php?topic=1486.0
or; for example, you observe ball spinning at one DD. You read numbers under the ball like
0,19,2,6,11,5,9,15
notice the difference 0-19 3 pockets then next rotation ball crosses 19 then next time 2 but then notice from 5-9 it is a rapid jump in difference in between numbers.[/quote]
Kinghem one great things about master more then one method is that you can adapt to different situations.
Forester is mention one deceleration method that is valid and if you only play one speed then it become a killer - even if that slow down the overall game plan.
PM me and i might help you out with the deceleration method for your next trip - then you will be more prepared.
One other thing you can do is to track one wheel with correlating condition during one day and run a simulation to pin point out your overall game plan.
Next day you confirm condition is still valid and you play - that way you increase your probability to succeed.
When you gain experience you can track one wheel and take a break out side the casino taking a cup of coffee and run your data.
Then when you have the overall picture you get back in to the casino and confirm the wheel has the same condition and play.
[quote=“kingem, post:18, topic:865”]Most of the time the rotor speed is 3 sec , what is the best time to apply ?
I’m with bankroll of 1100$ now from 1500$ .
I’m going to get some rest , tomorrow the last day I hope that I can manage to make some profit .
E.M[/quote]
Cannot define time just by rotor speed.
Definitely it is not 1.2s; more likely 2-3 sec.
How quickly to define time for VB2?
http://rouletteplace.com/index.php?topic=847.0
But if it is more than 2 sec it would be very hard to keep it steady without a timer.