due to a serious illness of the nervous system , which will most likely end my Kesselgucker life, I 've decided my Kesselgucker to provide data for sale .
It is to matrix tables ( per ball type and boiler , one each table).
Above 0.15 seconds , depending on the ball and boiler varies the rotation speed of the boiler from 2.0 to 5.5 in each 0.05 seconds : links for the entire duration of the sphere ( distance . .
The table include then around 1000 values . Example: MBB Caro 2.75 seconds per round ball : 11,0 seconds, then simply read and set the value from the table. If the value is -2, then you’ll just have from the start point of the sphere minus 2 compartments pull off and this is the sector where the ball will land after 11 seconds.
From the table, you can then easily create a disk ( copy shop or remodel with software than go to a casino zhis dics or learn by values and set .
Those who have interest, please contact me via PM with me.
There are values before the following boilers. John Huxley, Cammegh and MBB Caro .
This is a one-time action , the money I need to me in the U.S. for treatment .
But if you need values to other boilers , I need a video with at least 50 spins per boiler and associated type of ball.
This is of the evaluated in my laboratory and analyzed. Duration: about 2 weeks depending on the boiler.
The values in the form of a matrix table gets her then sent by me.
Please understand for this action , since my illness has taken very bad traits and professional treatment is essential for my life.
I dont understand… is it for one/2-3 pin game? Do you account for different number of revolutions that ball can make from X time, due changing conditions. Did you made complate profiles on wheels you have data? And what is the difference from jafco playing cards? You can pm.
I own for one wheel one table with over 1000 values. Yes, i made a complet profile for these wheels : Cammegh; Huxley and MMB caro wheel.
It looks like this
2.0 2.05 2.1 .... 5.30 (<- Rotor Speed)
14 -5
13,95 10
13,90 25
…
…
…
…
7.00
This means:
If the rotor speed is 2.00 and the estimated ball Total time: 14.0 seconds, then you have to go back from the start times of the ball minus 5 fields. ( startpoint of the ball on the wheel number 36 minus 5 fields on the wheel number 10.
you need only some exercise with yours eye and know how long the ball is still running total. Just after the first round of the ball (for example: first round: 0.5 seconds -> Total time: 11.5 seconds and so on.) And you have to estimate rotor speed, but this is not a problem if you practice.
Im sorry, Karl, lm unable to understand what data you are selling… every roulette is different, conditions are changing constantly, there are wholle bunch of different balls, that produce different timing of rotations. Even damn knee point during 1 hour can point to different rotation. There are some diamonds in the middle that tend to change distance ball goes, depending on conditions… For this matrix to work, every situation has to be accounted, so you will finish with lots of “matrixes” for every situation… make some scatter studies, depending of 2-3 pin game with different rotor speeds and different conditions. That would be interesting…
Btw, guys, l dont redgect the idea complitelly. Taking lap times at the day of play, we can calculate in pokets wich number gonna be at 12 oklock, for exemple, (assuming we use 12 as our observation point), in out prefered rotor speed. And follow ls methodology. But we will have to be controlling all the time how many rotations the ball actually does from our observation moument. This way we could have some “windows of the opportunity” where everything is just right. In such mouments higher edge would be possible. My 20 cents of contstructive thinking
but it did it…and it´s working. I think it is a little difficult to understand. For every wheel and ball; one “Matrix” with 1500 values.
The main values on the roulette ( exp: Cammegh wheel and Teflon ball) are the ball speed and the rotorspeed. So I choose one roulette and one ball and i begin to calculate. At the end i have this matrix with 1500 values for one roulette wheel and one ball and is almost perfect…with correct rotorspeed and ball speed you will win 95 % of your spins.
For other ball, i have other calculations and “matrixes”. So i have lots of matrixes :-).
[quote=“Karl Heinz Schmidt, post:8, topic:1035”]but it did it…and it´s working. I think it is a little difficult to understand. For every wheel and ball; one “Matrix” with 1500 values.
The main values on the roulette ( exp: Cammegh wheel and Teflon ball) are the ball speed and the rotorspeed. So I choose one roulette and one ball and i begin to calculate. At the end i have this matrix with 1500 values for one roulette wheel and one ball and is almost perfect…with correct rotorspeed and ball speed you will win 95 % of your spins.
For other ball, i have other calculations and “matrixes”. So i have lots of matrixes :-).
I hope you understand me.[/quote]
Of which values are you talking about?
Do you mean the “time to go” of the ball; rotor position at the collision point?
It is all about data-sheets only or are you selling some “system”?
but it did it…and it´s working. I think it is a little difficult to understand. For every wheel and ball; one “Matrix” with 1500 values.
The main values on the roulette ( exp: Cammegh wheel and Teflon ball) are the ball speed and the rotorspeed. So I choose one roulette and one ball and i begin to calculate. At the end i have this matrix with 1500 values for one roulette wheel and one ball and is almost perfect…with correct rotorspeed and ball speed you will win 95 % of your spins.
For other ball, i have other calculations and “matrixes”. So i have lots of matrixes :-).
I hope you understand me.[/quote]Karl… l senserely think that there is something missing in your description. As l hope, sooner or later you will anderstand this as well. I do not belive you are professional. With 95 persent hitt rate you dont need to sell anything. Just go to casino, spend 3hours and you are wealthy man till the rest of your life. If you can not place bets yourself, pm me and l will come and do it for you. But in the mean time go to vlc or gambler glen. I belive that there you have more chances to sell your matrix system.
Karl, as l stated, l dont regect your idea totaly, in fact it could work in selected conditions… the matter is how to select them. If you have some spreadsheet to make your calculations, l could in exchange to teach you haw to improove it and make it work. Feel free to email me . If by any chance you dont have mentioned spredsheet, do one and then contact me. Probably together we could make it better :
