FFA roulette computer R7 Viper

[ul][li]Predicting roulette levelled or tilted wheel [/li]

[li] Full rotor clocking or only half of the wheel, without any previous settings[/li]

[li] Clocking double or single ball revolutions [/li]

[li] Minimal amount of switch clicking, only 3 switch clicks can give accurate predictions.
With more clicks, the software uses a progressive calculation. Up to 4 ball rotations for a calculation and error correction.[/li]

[li] Ball clocking error correction[/li]

[li] Smart errors in case of miss clicks [/li]

[li] When setting the system feedback to the player, information about ball speed and the remaining time it will travel.
This enables a better way of setting and it can be used to analyse the wheel. [/li]

[li] Unlimited predictions during same spin, in any ball rotation.
This is a unique feature to myrulet.com and it’s powerful and an excellent feature.[/li]

[li] Selective play is possible after prediction, instant information will be given about quality of the prediction [/li]

[li]Predictions can be given at any time during the spin or at specific ball speeds.[/li]

[li]Completely separated adjustments for the ball in clock or anti-clock way direction.
It includes set up, offset and targeted ball speeds.[/li]

[li]Individual security locking system[/li]

[li]Team play, radio communication for additional player[/li][/ul]

I really don t think that anyone could ask for more ! :slight_smile:

You tremble casino :smiley:

I need more !!!
what about portable chip printer/maker !

abc…

FFA-Viper first impressions

I load new program read instruction twice and go to casino. Tests in real casino environment are better, surely much more difficult due to no replay option.

Instant set and play.
For first time I set same way as former FFA. I wait for a spin which produce proper DD hit- lower or middle of DD. From my experience such a hit gives offset shorter than average in shorter range.
I set in other direction, on different diamond and go to tilt 2 for instant play. Tilt 2 play when I finally got prediction (double click! I used to one!)combined with prediction class was proper and in my opinion one from my better sessions from last few weeks. I reset FFA several time during one dealer play and right after they change, it’s easy and with new set in one direction is easy to compare results with former set in other direction. I played also left spins on one table and right one on the other. Had plenty of new possibilities.
Always after proper set had proper results .

Advanced set, than tilt2 and Viper play.
For first time it was hard job! But finally I managed.

Why hard? ? First patience, this is nothing new for me, I learned that only patience, good “toy” from Forester and some knowledge can save me in casino.

I find out other difficulties; How to remember several results ? plenty of digits!
I do not want to print on a paper" 1,395 8,1 good hit" and so on, It’s same to print “BEVARE I HAVE FFA-VIPER WITH ME”. I need practice & find my way. The main problem happened to me when I measured “border” spin which I waited for. Player next to me start screaming loudly right in the moment when ffa talked to me! Casinos are sometimes truly noisy places.

Anyway, after defining “border” ball speeds in only one direction I turn FFA-Viper into Viper mode with narrow deviation 3 and … First 6 predicted spins FFA miss predicted number by 2 or 3 pockets only once by 5 always on the same side, before number. Deadly accurate!

Unfortunately dealer changed and new one runs much shorter spins, out of my viper set(7). My next viper set on other wheel wasn’t so perfect , was only very good 60-75% of spins in 10 pockets sector.
Also set for tilt2 play based on data collected for viper play results with better predictions comparing my first sets.

Summary:
I have Very Positive opinion about new program.
Ideas and the way of implementation of the ideas into new program are very good (nearly).
First let me say THANK YOU FORESTER, Viper, Whoever !
Finally separate set in both directions. !!!

Everyone who will set FFA -Viper from now can see and know that left and right spins differ even when have same DD. With former FFA I had good results playing only one chosen direction.
Viper set&play - perfect.
What is negative in my opinion?

  1. No possibility to recall last measured set data ( at minimum last one) in noisy casino -
    Please add it.

  2. Double click in tilt 2 play. It confuses me, two different click procedures in one device!?
    Confirmation of the tilt2 prediction after next two revolution this is pure waste of the time!
    Waste of the time right before NMB!
    Please add single ball click as an option.

( I need confirmation of the prediction because in my ffa 24 sounds same like 34! Sometimes 35 is also same. It’s hard to believe but also cannot recognize 4 and 5! I play such a predictions only when next one gives number next to above i.e. 10 or 17. Is it only my problem, or someone else have it also?)
New Viper pronounce prediction only once. !
To avoid such a misunderstanding will be nice to hear right after prediction next number.
Please think it over.

  1. Game counter and lock/unlock.
    Nothing to discuss, I would do the same much earlier than you!
    But… I used to patience play means plenty measured spins and rare played. Yesterdays visit just to get familiar with new options and some personal tests takes me 4 hours and as a result my counter says now 928!

You will know how often I’m playing!
Additional remarks; In one set when play tilt2 right after proper prediction I heard “now” after 3-4 minutes! And there was no reaction for switch. It was on one direction, repeats spin after spin. Disappeared after reset.
During tilt2 play I heard sometimes predictions followed by “A” .?!
Overall; Very good , the best I ever have.
Thank you Forester,
Abc…

Its nice that you tested it in real conditions and thank you for the report and your nice words.

“”“No possibility to recall last measured set data ( at minimum last one) in noisy casino “””

The Viper system is made for writing down on the casino card the TIMES that we hear.
We can not remember 7-8 times that we need to have in order to set the perfect widow for the wheel…
So the writing the TIMES is a must…

Noone will ask you to show the Casino card…and even If they will they will not see anything because when you will have the correct window you will emediatelly delete the times from the Card with the pen or you will have already get rid of it before the real play

Geeee, if someone reads your post he may come in to conclusion that we are working on something that can be used to cheat casinos :o

I find out other difficulties; How to remember several results ? plenty of digits! I do not want to print on a paper" 1,395 8,1 good hit" and so on, It's same to print "BEVARE I HAVE FFA-VIPER WITH ME". I need practice & find my way. The main problem happened to me when I measured "border" spin which I waited for. Player next to me start screaming loudly right in the moment when ffa talked to me! Casinos are sometimes truly noisy places. Anyway, after defining "border" ball speeds in only one direction I turn FFA-Viper into Viper mode with narrow deviation 3 and ... First 6 predicted spins FFA miss predicted number by 2 or 3 pockets only once by 5 always on the same side, before number. [b] Deadly accurate![/b]

You only need to remember spins on the edges, even the FFA tells you the time in ms. you do not have to remember last digit. Regarding remaining time, any time from any spin would be good.

Unfortunately dealer changed and new one runs much shorter spins, out of my viper set(7). My next viper set on other wheel wasn't so perfect , was only very good 60-75% of spins in 10 pockets sector. Also set for tilt2 play based on data collected for viper play results with better predictions comparing my first sets.

When listening time in set up mode, it’s always god to exit on a good middle range spin, as in your case where NMB was changed you could easily switch to unlimited mode and have earlier prediction. (Use A,B,C based on amount of hits to DD)

Summary: I have Very Positive opinion about new program. Ideas and the way of implementation of the ideas into new program are very good (nearly). First let me say THANK YOU FORESTER, Viper, Whoever ! Finally separate set in both directions. !!! Everyone who will set FFA -Viper from now can see and know that left and right spins differ even when have same DD. With former FFA I had good results playing only one chosen direction. Viper set&play - perfect.

Surely, fully independent mode for both ball directions is better even if from old program PS was perfectly set.

1. No possibility to recall last measured set data ( at minimum last one) in noisy casino - Please add it.

I was aware of it, but recalling it may be more complicated than taking new samples.

2. Double click in tilt 2 play. It confuses me, two different click procedures in one device!? Confirmation of the tilt2 prediction after next two revolution this is pure waste of the time! Waste of the time right before NMB! Please add single ball click as an option

I assume someone will play one or the other way based on his needs and preferences. With double ball clocking we get more time in between clicks so we can get ABC information, it is more suitable for earlier predictions and more accurate since times of 4 ball rotations are used…

( I need confirmation of the prediction because in my ffa 24 sounds same like 34! Sometimes 35 is also same. It's hard to believe but also cannot recognize 4 and 5! I play such a predictions only when next one gives number next to above i.e. 10 or 17. Is it only my problem, or someone else have it also?)
It might be your problem, some of audio chips make kind of click on each sound, but some talk smooth.
New Viper pronounce prediction only once. ! To avoid such a misunderstanding will be nice to hear right after prediction next number. Please think it over.
That may be good idea. Previously we could have many predictions on each ball rotation clocked, but Viper can't do it so it may be added.
3. Game counter and lock/unlock. Nothing to discuss, I would do the same much earlier than you! But.. I used to patience play means plenty measured spins and rare played. Yesterdays visit just to get familiar with new options and some personal tests takes me 4 hours and as a result my counter says now 928!

Woooou, you played close to 100 spins.

Additional remarks; In one set when play tilt2 right after proper prediction I heard "now" after 3-4 minutes! And there was no reaction for switch. It was on one direction, repeats spin after spin. Disappeared after reset.

I didn’t notice any bug, if something goes wrong it should come back in 65,535ms, if you come to that again please notice as many details as you can and send me an email.

During tilt2 play I heard sometimes predictions followed by "A" .?! Overall; Very good , the best I ever have. Thank you Forester, Abc..

It should be C and B, A should be jumped so you hear only predicted number.
Thanks for the feedback, I am glad you like it and positive that after some play you’ll like it even more.

:oWho plays casino games?, Who even think about playing roulette? Wheels produce random results so how can we? :o
Best,
Abc…
By the way;

  1. I need to comment Viper’s opinion: " No one will ask you to show the Casino card… "
    People who place late bet, observing wheel every time are under special control by casino security staff. Especially when such a player have good results.
    They have cameras, they can zoom in, and read your card no matter how small letters you print! When you print digits which does NOT correspond with result numbers, there is no matter what and how you print, no matter of code you use, even binary or hex :P, you are OBSERVED! You can delete, destroy, whatever. They have it RECORDED.
    In my opinion we need possibility of recalling last measured spin. This is a matter of safe, accurate and fast set up of FFA-Viper.
    Forester, maybe kind of save option after measured spin? Save directly to Viper menu?
  2. Next number right after prediction. “That may be good idea. Previously we could have many predictions on each ball rotation clocked, but Viper can’t do it so it may be added.”
    Please do it !

Just remember upper and lower limits.
I am still thinking about settings idea.
That subject shouldn’t be discussed here.
Here we should only write

[move]The FFA R7 is the fastest, the most accurate and the most flexible roulette computer.[/move]

;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D

Actually it is !
:smiley: The FFA R7 is the fastest, the most accurate and the most flexible roulette computer. :smiley:
I tryed yesterday FFA R7b & … I was blind without ball times with former version. Now big part of my remarks are not valid any more.

best,
abc…